DOGA electric screwdrivers

DOGA Electric Screwdrivers – Brushless and Brush Shut-off Screwdrivers for Precise Assembly

DOGA • 0.02–9.8 N·m • 73 Models in 13 Series • Brushless GX / GY, Brush GA / DO • Straight, Pistol and Spindle • ESD Protection on Most Models

Overview

DOGA electric shut-off screwdrivers and spindles are built for precision, ergonomics and robustness. The clutch shuts the motor off when the set torque is reached, and the digital speed adjustment and soft start keep every joint repeatable, so you produce quality assemblies while keeping production costs down.

The range covers 0.02 to 9.8 N·m: the brushless GX series from very low to common torques, the brushless GY and PGY series for high-speed vertical and horizontal screwdriving, the GXA and GYA spindles for automatic machines and robots, and the light brush-motor GA and DO screwdrivers.

Key Features

  • Digital speed adjustment: the speed is set on the controller and stays constant, even on demanding joints
  • Soft start: gentle thread engagement; adjustable on the XS-40D (30–200 ms) and XT-35D (30–2000 ms) controllers
  • Contactless switches: start / reverse and shut-off work with magnetic sensors for a longer life
  • ESD protection: on most models
  • Surge and temperature protection: protects the tool and the controller from incorrect use
  • Brushless motor: GX and GY series: longer life, noise below 70 dBA, vibration below 2.5 m/s²
  • For automation: GXA and GYA spindles with external inputs / outputs; PLC interface and counting input on the controllers
  • Delivered ready to use: with a 3 m cable; GXD series without controller, for direct connection to a 230 V socket

All DOGA electric screwdrivers

Torque, speed, start, drive, voltage, weight and DOGA order code of every model, grouped by series, with the matching controller (source: DOGA catalogue DOC. 60207.11/26).

Model Torque (N·m) Speed (rpm) Start Drive Voltage (V) Weight (kg) Code
GX micro-torque series - Brushless straight screwdriversGX micro-torque series - Brushless straight screwdriversController: XS-40D
GX 035 ESD 0.02–0.34 300–1100 Lever half-moon, 4 mm 30 0.24 P100446
GX 035 mini angle nutrunner, 0.6 Nm max 0.4–0.6 15–55 Lever Torx 6 / 8 bit   0.36 P215436
GX 045 ESD 0.04–0.45 300–700 Lever half-moon, 4 mm 30 0.24 P100270
Standard GX series - Brushless straight screwdriversStandard GX series - Brushless straight screwdriversController: XS-40D
GX 80 ESD V2 0.09–0.8 450–1000 Lever Hex 1/4" 30 0.43 P100044
GX 80 P ESD V2 0.09–0.8 450–1000 Push to start Hex 1/4" 30 0.43 P100241
GX 120 ESD V2 0.2–1.2 300–700 Lever Hex 1/4" 30 0.43 P100010
GX 120 P ESD V2 0.2–1.2 300–700 Push to start Hex 1/4" 30 0.43 P100105
GX 150 ESD-H 0.3–1.47 800–1700 Lever Hex 1/4" 40 0.60 P100098
GX 150 P ESD-H 0.3–1.47 800–1700 Push to start Hex 1/4" 40 0.60 P100083
GX 220 ESD-H 0.6–2.15 600–1200 Lever Hex 1/4" 40 0.60 P100016
GX 220 P ESD-H 0.6–2.15 600–1200 Push to start Hex 1/4" 40 0.60 P100025
GX 450 ESD-H 1–4.41 300–600 Lever Hex 1/4" 40 0.62 P100011
GX 450 P ESD-H 1–4.41 300–600 Push to start Hex 1/4" 40 0.62 P100023
GXS series - Brushless straight screwdriversGXS series - Brushless straight screwdriversController: XS-40D
GXS 80 ESD V2 0.09–0.8 450–1000 Lever Hex 1/4" 30 0.43 P101709
GXS 120 ESD V2 0.2–1.2 300–700 Lever Hex 1/4" 30 0.43 P100553
GXS 150 ESD-H 0.3–1.47 800–1700 Lever Hex 1/4" 40 0.60 P102475
GXS 220 ESD-H 0.6–2.15 600–1200 Lever Hex 1/4" 40 0.60 P101405
GXT series - Brushless straight screwdriversGXT series - Brushless straight screwdriversController: XS-40D
GXT 80 ESD V2 0.09–0.8 450–1000 Lever Hex 1/4" 30 0.43 P103202
GXT 120 ESD V2 0.2–1.2 300–700 Lever Hex 1/4" 30 0.43 P100367
GXT 150 ESD-H 0.3–1.47 800–1700 Lever Hex 1/4" 40 0.60 P103529
GXT 220 ESD-H 0.6–2.15 600–1200 Lever Hex 1/4" 40 0.60 P100968
GXT 450 ESD-H 1–4.41 300–600 Lever Hex 1/4" 40 0.62 P100450
GX FS series - Brushless straight screwdriversGX FS series - Brushless straight screwdriversController: XS-40D
GX 60 FS ESD 0.1–0.6 1550 Lever Hex 1/4" 30 0.44 P109110
GX 60 FSP ESD 0.1–0.6 1550 Push to start Hex 1/4" 30 0.44 P107077
GX 80 FS ESD 0.2–0.8 1250 Lever Hex 1/4" 30 0.44 P103190
GX 80 FSP ESD 0.2–0.8 1250 Push to start Hex 1/4" 30 0.44 P104980
GX 120 FS ESD 0.3–1.2 1000 Lever Hex 1/4" 30 0.44 P100936
GX 120 FSP ESD 0.3–1.2 1000 Push to start Hex 1/4" 30 0.44 P102302
GX 180 FS ESD 0.4–1.8 700 Lever Hex 1/4" 30 0.44 P100242
GX 180 FSP ESD 0.4–1.8 700 Push to start Hex 1/4" 30 0.44 P101230
GX BT series - Brushless straight screwdriversGX BT series - Brushless straight screwdriversController: XS-35D
GX 35 BT ESD-G 1–3.4 700–1500 Lever Hex 1/4" 35 0.92 P101533
GX 50 BT ESD-G 2–4.9 600–1050 Lever Hex 1/4" 35 0.92 P101024
GX 100 BT ESD-G 4–9.8 150–550 Lever Hex 1/4" 35 0.92 P100049
GXD series - Brushless straight screwdriversGXD series - Brushless straight screwdriversController: none, direct 230 V connection
GXD 180 0.4–1.75 1400 Lever Hex 1/4" 230 0.97 P205299
GXD 180P 0.4–1.75 1400 Push to start Hex 1/4" 230 0.97 P205300
GXD 250 0.7–2.45 1100 Lever Hex 1/4" 230 0.97 P205301
GXD 250P 0.7–2.45 1100 Push to start Hex 1/4" 230 0.97 P205302
GXD 350 1.1–3.45 790 Lever Hex 1/4" 230 0.97 P218399
GXD 350P 1.1–3.45 790 Push to start Hex 1/4" 230 0.97 P218402
GXA series - Brushless spindlesGXA series - Brushless spindlesController: XS-40D FA
GXA 035 ESD V2 0.03–0.35 300–1100 External half-moon, 4 mm 30 0.45 P104972
GXA 045 ESD V2 0.04–0.45 300–700 External half-moon, 4 mm 30 0.45 P167806
GXA 080 ESD V2 0.1–0.8 450–1000 External Hex 1/4" 30 0.45 P103207
GXA 120 ESD V2 0.2–1.2 300–700 External Hex 1/4" 30 0.45 P101624
GXA 150-H 0.3–1.47 800–1700 External Hex 1/4" 40 0.72 P102506
GXA 150P-H 0.3–1.47 800–1700 Push to start Hex 1/4" 40 0.72 P109082
GXA 220-H 0.6–2.15 600–1200 External Hex 1/4" 40 0.72 P101535
GXA 220P-H 0.6–2.15 600–1200 Push to start Hex 1/4" 40 0.72 P104971
GXA 450-H 1–4.41 300–600 External Hex 1/4" 40 0.74 P100787
GXA 450P-H 1–4.41 300–600 Push to start Hex 1/4" 40 0.74 P102923
GY series - Brushless straight screwdriversGY series - Brushless straight screwdriversController: XT-35D
GY 35 ESD-G 1–3.4 500–1500 Lever Hex 1/4" 35 0.8 P101804
GY 35P ESD-G 1–3.4 500–1500 Push to start Hex 1/4" 35 0.8 P101708
GY 50 ESD-G 2–4.9 400–1100 Lever Hex 1/4" 35 0.8 P101285
GY 50P ESD-G 2–4.9 400–1100 Push to start Hex 1/4" 35 0.8 P102490
GY 100 ESD-G 4–9.8 250–500 Lever Hex 1/4" 35 0.85 P100320
PGY series - Brushless pistol screwdriversPGY series - Brushless pistol screwdriversController: XT-35D
PGY 35 ESD-G 1–3.4 500–1500 Trigger Hex 1/4" 35 0.9 P101621
PGY 35 ESD-G Top Exit 1–3.4 500–1500 Trigger Hex 1/4" 35 0.9 P101800
PGY 50 ESD-G 2–4.9 400–1100 Trigger Hex 1/4" 35 0.9 P102025
PGY 50 ESD-G Top Exit 2–4.9 400–1100 Trigger Hex 1/4" 35 0.9 P101627
PGY 100 ESD-G 4–9.8 250–500 Trigger Hex 1/4" 35 0.95 P102683
PGY 100 ESD-G Top Exit 4–9.8 250–500 Trigger Hex 1/4" 35 0.95 P104377
GYA series - Brushless spindlesGYA series - Brushless spindlesController: XT-35D
GYA 35 ESD-G V2 1–3.4 500–1500 External I/O Hex 1/4" 35 0.95 P102320
GYA 50 ESD-G V2 2–4.9 400–1100 External I/O Hex 1/4" 35 0.95 P102492
GYA 100 ESD-G V2 4–9.8 250–500 External I/O Hex 1/4" 35 0.95 P100489
GA series - Brush straight screwdriversGA series - Brush straight screwdriversController: XS-38D or XT-30D V2
GA 150 ESD 0.08–0.78 700 / 1000 Lever Hex 1/4" 30 0.31 P102902
GA 150P ESD 0.08–0.78 700 / 1000 Push to start Hex 1/4" 30 0.31 P105867
GA 180 ESD 0.1–1.18 450 / 700 Lever Hex 1/4" 30 0.31 P100350
GA 180P ESD 0.1–1.18 450 / 700 Push to start Hex 1/4" 30 0.31 P102021
DO series - Brush straight screwdriversDO series - Brush straight screwdriversController: XS-38D
DO 250 ESD 0.2–2.45 630 / 1050 Lever Hex 1/4" 38 0.72 P101465
DO 250P ESD 0.2–2.45 630 / 1050 Push to start Hex 1/4" 38 0.72 P102698
DO 350 ESD 0.2–3.43 460 / 750 Lever Hex 1/4" 38 0.72 P101184
DO 350P ESD 0.2–3.43 460 / 750 Push to start Hex 1/4" 38 0.72 P103182
DO 450 ESD 0.3–4.41 330 / 550 Lever Hex 1/4" 38 0.72 P100817
DO 450P ESD 0.3–4.41 330 / 550 Push to start Hex 1/4" 38 0.72 P101788

Controllers

Every screwdriver except the GXD series runs on a DOGA controller. Mains voltage, output voltage and current, weight, dimensions and code:

Controller Mains (V AC) Output (V) Current (A) Weight (kg) Dimensions (mm) For Code
XS-40D 220 30 / 40 3 0.86 200 × 115 × 65 GX series P100001
XS-40D FA – – – – – GXA spindles, automated stations –
XT-35D 230 35 4 2.4 95 × 221 × 143 GY, PGY, GYA series P100043
XS-35D 220 35 4 1.2 200 × 115 × 65 GX BT series P100050
XS-38D 230 30 / 38 2.5 0.71 200 × 115 × 65 GA and DO series P100106
XT-30D V2 230 30 1.2 0.27 140 × 70 × 40 GA series P100927
POKA-YOKE Scout II – – – – – counting controller for XS-35D, XT-35D and XS-40D (up to 4 screwdrivers) P100256

Also available: DOGA hybrid screwdrivers

The DOGA hybrid tools have a built-in air clutch controlled through a pressure sensor and a microprocessor, with up to 8 tightening programs (torque, speed, angle, soft start, torque tuning), USB port and error display. Models HD150A (0.5–1.5 N·m, 500–1800 rpm) and HD450A (1.5–4.4 N·m, 300–600 rpm) with the HDC-40i hybrid controller.

Selection and Quotation

→ Ask us which DOGA screwdriver and controller fit your application

InterElectronic supplies DOGA electric screwdrivers, controllers and accessories in Hungary and the region.


AJÁNLOTT TERMÉK High Speed SMT lines