Double-Sided Simultaneous Inspection • 3D, 15 µm/pixel • MagicClick in Minutes • Full 3D SPI Capable • MES Ready
The GÖPEL Multi Line SMD is a cost-effective 3D AOI system for inline use. Thanks to double-sided inspection, SMD assemblies can be inspected completely, from above, from below or on both sides simultaneously, in a single pass.
MagicClick generates the AOI test program fully automatically in a few minutes, the system can also be used as a full 3D solder paste inspection system, and flexible data interfaces connect it to the line, to MES and to traceability systems.
| Parameter | Specification |
|---|---|
| Camera Module | 3D AOI: 3D/2D camera module, orthogonal camera, telecentric optics and 3D image capturing sensors |
| Resolution per Pixel | 15 µm |
| Max. Inspection Height | 35 mm |
| Component Clearance | 40 mm |
| Configurations | inspection from above, from below, or both sides simultaneously |
| 3D SPI | can be used as a full 3D solder paste inspection system |
| Max. Inspection Area | 540 × 450 mm |
| Max. Carrier Size | up to 620 × 510 mm |
| Max. Transport Weight | 15 kg |
| Transport | conveyor belt with or without carriers; left-right, right-left, left-left, right-right |
| Inline Interface | SMEMA, HERMES, Siemens, sensor |
| Power Supply | 230 V AC / 2 kVA, compressed air 6 bar, < 20 l/h |
| Dimensions (W×D×H) | 1150 × 1300 × 1800 mm |
| Weight | approx. 800 kg |
→ Request the datasheet, a demonstration or a quotation
InterElectronic is the GÖPEL electronic partner for sales, installation and service in Hungary and the region.
Source: GÖPEL electronic official materials • November 2026
